TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
TROUBLE DIAGNOSES
TROUBLE DIAGNOSES
Diagnostic Procedure 45 (Cont'd)
Neutral switch
¢ MONITOR NO FAIL
[_]
START SIGNAL
OFF
INSPECTION START
IDLE POSITION
ON
OFF
AIR COND SIG
ON Vv O.K.
NEUTRAL SW
CHECK OVERALL FUNCTION.
INSPECTION END
Vv on 1) Turn ignition switch RECORD _| 2) Check neutral switch signal in ‘DATA SEF384J MONITOR” mode with CONSULT. DISCONNECT Neutral position: ON
||_c~untt fel CONNECTOR |]
€: } Except above: OFF OR 1) Set shift lever to the neutral position. 2) Disconnect E.C.U. har- me o~ ness connector. 3) Check harness continu- ity between E.C.U. ter- minal @8) and body ground. (3) Continuity should exist. N.G. y Turn ignition switch “OFF’’. > eo, | v N.G.
CHECK GROUND CIRCUIT.
,| Repair harness or connectors. a 1) Disconnect neutral switch harness connector. SEF219K: 2) Check harness continuity be- tween terminal () and body f€) Ae ground. Continuity should exist.
|L_c~mrt Pleasecroe J
ICID) O.K. Vv Disconnect E.C.U. har- L_] ness connector. Cs y N.G. SEF220K
CHECK INPUT SIGNAL CIRCUIT.
> Check the following. 1) Check harness continuity be- e Harness connectors(9), tween E.C.U. terminal @5) and e Harness connectors (17), terminal @. e Harness continuity between Continuity should exist. E.C.U. and neutral switch If N.G., repair harness or con- O.K. nectors.
@
EF & EC-175
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.