REAR DISC BRAKE (CL9H) - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › REAR DISC BRAKE (CL9H) - Nissan 240SX 1991-1992 Workshop Manual
REAR DISC BRAKE (CL9H)
REAR DISC BRAKE (CL9H)
Assembly (Cont'd)
@ Install ring C with suitable tool. Ring C ~ Key plate —_cai>
Push rod
Rod —f
SBR878 @ Install seat, spring, spring cover and ring B with suitable press and drift.
SBR492A Inspection
DISC PAD
Check disc pad for wear or damage. Standard thickness (A):
9.5 mm (0.374 in) Pad wear limit (A):
2.0 mm (0.079 in)
SMA364A
ROTOR RUNOUT
@ Check runout using a dial indicator. @ Make sure that axial end play is within the specifications before measuring. Refer to section RA. Rotor repair limit: Maximum runout (Total indicator reading at center of rotor pad contact surface)
0.07 mm (0.0028 in)
SBR845
ROTOR THICKNESS
Rotor repair limit: Minimum thickness
8.0 mm (0.315 in)
SBR847 BR-19
Parts & tools for this job For Nissan 240SX
- PARTRear brake padsSearch: Nissan 240SX rear brake pads
- TOOLCaliper piston rewind toolSearch: brake caliper piston rewind tool
- FLUIDBrake fluidSearch: brake fluid
As an Amazon Associate we earn from qualifying purchases.