TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
TROUBLE DIAGNOSES
TROUBLE DIAGNOSES
Electrical Components Inspection (Cont'd)
INHIBITOR SWITCH
1. Check continuity between terminals @) and @) and between terminals @) and @, @, ©, @, ®, @ while moving selector lever through each range.
| Terminal No. | O!@|/ | /@}]@| | |O]@] | @ | @) | |
|---|---|---|---|---|---|---|
| Terminal No. Lever position | O!@|/@}]@|O]@] | @ | @) | |||
| P | O--O | O—--O | ||||
| R | Oo | O | ||||
| N | O--O | ©O- | © | |||
| D | O | |||||
| 2 | Oo | O | ||||
| 1 | Oo | © |
| —_ 7 Inhibitor switch '
SAT843B
2. If N.G., check again with manual control linkage discon- nected from manual shaft of A/T assembly. — Refer to step
1.
3. If O.K. on step 2, adjust manual control linkage. — Refer to
“ON-VEHICLE SERVICE”.
If N.G. on step 2, remove inhibitor switch from A/T and
4. check continuity of inhibitor switch terminal. — Refer to step 1. If O.K. on step 4, adjust inhibitor switch. — Refer to ‘“ON-
5.
VEHICLE SERVICE”.
If N.G. on step 4, replace inhibitor switch.
6.
SAT851B
REVOLUTION SENSOR
/iTM®
@ For removal and installation, refer to ““ON-VEHICLE SERV-
> J miscomecr <4 Go
| e | Check resistance between terminals @), @) and @). Terminal No. Resistance | |
|---|---|---|
| Terminal No. ® @) | Resistance 500 - 6502 | |
| (2) (8) | No continuity | |
| @ (3) | No continuity |
SAT844B
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.