Workshop Manuals Factory service & repair Nissan and Datsun
01 QUICK REFERENCE INDEX02 Front Cover03 Foreword04 Table of Contents05 General Information06 Windshield Header Trim07 Windshield Header Molding08 Weatherstrips and Retainers09 Rear Seat10 Quarter Trim Panel11 Quarter Window and Regulator12 Door and Door Window13 Seat Belts14 Back and Quarter Belt Moldings15 Headliner Assembly16 Top Cover Assembly17 Backlite Assembly18 Stay Pads, Side and Rear19 No. 1 Bow20 No. 2 Bow21 No. 3 Bow22 No. 4 Bow23 Rear and Side Rail24 Hydraulic System25 Electrical26 Deck Lid Hinge and Trunk Trim27 Body Structural28 Index29 Back Cover30 QUICK REFERENCE CHART
Nissan and Datsun Nissan 240SX 1991-92 Workshop Manual01 · QUICK REFERENCE INDEX
01 · General

DIAGNOSES — Overall System - Nissan 240SX 1991-1992 Workshop Manual

Make
Nissan and Datsun
Model
240SX Nissan 240SX 1991-92 Workshop Manual
Section
General › DIAGNOSES — Overall System - Nissan 240SX 1991-1992 Workshop Manual
QUICK REFERENCE INDEXDIAGNOSES — Overall System - Nissan 240SX 1991-1992 Workshop Manual

DIAGNOSES — Overall System

DIAGNOSES — Overall System

Operational Check

The purpose of the operational check is to confirm that the system operates as it should. The systems which are checked are the blower, mode (discharge air), intake air, temperature decrease, temperature increase. CONDITIONS: Engine running at normal operating temperature.

PROCEDURE: Check blower

1. aslalale| 1) Slide Fan lever to 1-speed. Y | mee 9 co o7 Lome J [ | [oe | Blower should operate on 1-speed. %0 123 4 ¢ ——S=—)_ J Then slide Fan Lever to 2-speed. eS i (9 =——— ——— Continue checking blower speed until all four speeds are checked. Leave blower on 4-speed.

RHA371B Check discharge air Press the VENT button. VENT indicator should light. Confirm that all discharge air comes out of face vents. Press the B/L button. B/L indicator should light. Confirm that discharge air comes out of face vents and foot vents. Press the FOOT button. FOOT indicator should light. Confirm that discharge air comes out of foot vents, with RHA372B some air from defroster vents. Press the F/D button. F/D indicator should light. Confirm that discharge air comes out of foot vents, with some air from defroster vents, and that intake door position is at FRE. Press the DEF button. DEF indicator should light. The discharge air should be coming only from defroster vents. At the same time compressor should turn ON and intake door position be at FRE. Check recirc Press RECIRC button. RECIRC indicator should light. 2) Listen for intake door position change (you should hear blower sound change slightly).

RHA373B HA-55

Parts & tools for this job For Nissan 240SX

As an Amazon Associate we earn from qualifying purchases.