REPAIR FOR COMPONENT PARTS - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › REPAIR FOR COMPONENT PARTS - Nissan 240SX 1991-1992 Workshop Manual
REPAIR FOR COMPONENT PARTS
REPAIR FOR COMPONENT PARTS
Rear Internal Gear and Forward Clutch Hub
(Cont'd) ASSEMBLY
1. Install snap ring onto forward clutch hub.
2. Install end bearing. |
SAT901A Install forward one-way clutch onto clutch hub. Install forward one-way clutch with flange facing rearward. Install end bearing. are Install snap ring onto forward clutch hub.
SAT904A
6. Install thrust washer onto rear internal gear. @ Apply petroleum jelly to thrust washer. @ Securely insert pawis of thrust washer into holes in rear internal gear.
“MN
Hole for thrust washer pawl ——EAP) satoosa
7. Position forward clutch hub in rear internal gear.
SAT907A TM.
8. After installing, check to assure that forward clutch hub rotates clockwise.
Le \ ~
spon a o—~ t 4p ; NG SAT9S05A
AT-159
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.