METER AND GAUGES - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › METER AND GAUGES - Nissan 240SX 1991-1992 Workshop Manual
METER AND GAUGES
METER AND GAUGES
Fuel Tank Gauge Unit Check @ For removal, refer to FE section. Check the resistance between terminals @ and ©. C EIS
| Ohmmeter (4) | (-) | Float position Resistance Fuel value mm (in) Q 2 (US gal, Imp gal) |
|---|---|
| x Approx. 57.6 Vy Full | 99 (3.62) | 43°28 | (5-1/4, 12-5/8) | |
| x Approx. 57.6 Vy Full | 99 (3.62) | 43°28 | (5-1/4, 12-5/8) | |
| SPE | % Approx. 32.9 |? | M2 | asa (6.08) | 277° 949 | (8.3/4, 7-1/4) Approx. 6.6 |
| Approx. 6.6 * 78.3 - 84.8 3 | Empty | 556 (8.90) | 78 (1-3/4, 1-1/2) |
SEL407L
Thermal Transmitter Check Ohmmeter a Check the resistance between the terminals of thermal transmitter wi . 7 and body ground. ° a — e@ lax TT a SEL698F
| Water temperature ; | Resistance | |
|---|---|---|
| Water temperature ; 60°C (140°F) | ~ | Resistance Approx. 70 - 902 |
| 100°C (212°F) | Approx. 21 - 242 |
Oil Pressure Switch Check
Ohmmeter wi Check the continuity between the terminals of oil pressure switch and body ground. e®¢ =
| | Oil pressure kPa (kg/cm?, psi) | Continuity | |
|---|---|---|
| : wort ngine star | More than 10 - 20 (0.1 - 0.2, 1.4 - 2.8) | NO |
| . Engine stop | Less than 10 - 20 (0.1 -0.2, 1.4 - 2.8) | YES |
! scu7aax Speed Sensor Signal Check Speed sensor
1. Remove speed sensor from transmission. Location: Refer to “Location of Electrical Units”.
2. Turn speedometer pinion quickly and measure voltage across @ and ©. ‘SY Speed sensor pinion Voltmeter —, Approx. 0.5V bia [Alternating @ ©| current (A.C.)] SEL408L EL-58
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.