ENGINE LUBRICATION SYSTEM - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › ENGINE LUBRICATION SYSTEM - Nissan 240SX 1991-1992 Workshop Manual
ENGINE LUBRICATION SYSTEM
ENGINE LUBRICATION SYSTEM
Oil Pump (Cont’d)
O) 37 - 50 (0.38 - 0.51,
2.7 - 3.7) ©) 16 - 21 (1.6 - 2.1, 12 - 15) a Ole4-75 (0.65 - 0.76, ; o
4.7 - 5.5) & @— -— 0) m— ©) (C) 39 - 59
(0) : Nem (kg-m, ft-lb)
(1.6-1.9,12-14) (4-629 - 43) SLC481A @) Front cover @® Cap @) Outer gear @ Washer @) Inner gear Spring @ Oil pump cover @ Regulator valve © Oil strainer Regulator valve assembly
e Always replace oil seals and gaskets with new ones. e When installing oil pump, apply engine oil to inner and outer gears.
REGULATOR VALVE INSPECTION
mm TT
1. Visually inspect components for wear and damage.
Washer . tos
2. Check oil pressure regulator valve sliding surface and valve spring.
3. - Coat regulator valve with engine oil and check that it falls smoothly into the valve hole by its own weight. If damaged, replace regulator valve set or oil pump assembly.
Cap Regulator valve SLC542A
LC-5
Parts & tools for this job For Nissan 240SX
- PARTEngine gasket setSearch: Nissan 240SX engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
As an Amazon Associate we earn from qualifying purchases.