HOW TO USE THIS MANUAL - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › HOW TO USE THIS MANUAL - Nissan 240SX 1991-1992 Workshop Manual
HOW TO USE THIS MANUAL
HOW TO USE THIS MANUAL
A QUICK REFERENCE INDEX, a black tab (e.9/EGM) is provided on the first page. You can quickly find the first page of each section by mating it to the section’s black tab.
2. THE CONTENTS are listed on the first page of each section.
3. THE TITLE is indicated on the upper portion of each page and shows the part or system.
4. THE PAGE NUMBER of each section consists of two letters which designate the particular section and a number (e.g. ‘“BR-5’’).
5. THE LARGE ILLUSTRATIONS are exploded views (See below) and contain tightening torques, lubrication points and other information necessary to perform repairs. The illustrations should be used in reference to service matters only. When ordering parts, refer to the appropriate PARTS CATALOG.
“Example” Pad retainer
(0) 54- 64 (5.5 - 6.5, 40 - 47)
(Upper side)
| SD 2 ”
Main pin
Torque a to sliding portion member Inner shim Copper washer om 17 - 20 (1.7 - 2.0, 12 - 14)
Pad retainer (Lower side) Ay)aaa
G0 Brake hose >a bleeder (0) 7-9 (0.7 -0.9, 5.1 - 6.5) Pin bolt Pad
Cylinder body Mm
(2.2 - 3.2, 16 - 23) (2.2-3. . 22 - 31 EI Dust seal Piston seal ven 888 Piston ES 64
©) : N-m (kg-m, ft-lb)
isron SBR364A
6. THE SMALL ILLUSTRATIONS show the important steps such as inspection, use of special tools, knacks of work and hidden or tricky steps which are not shown in the previous large illustrations. Assembly, inspection and adjustment procedures for the complicated units such as the automatic transaxle or transmission, etc. are presented in a step-by-step format where necessary.
7. The following SYMBOLS AND ABBREVIATIONS are used: ©) Tightening torque M/T : Manual Transaxle/Transmission Should be lubricated with grease. A/T : Automatic Transaxle/Transmission Unless otherwise indicated, use Tool : Special Service Tools recommended multi-purpose grease. L.H.D. : Left-Hand Drive Should be lubricated with oil. R.H.D. : Right-Hand Drive -
Automatic Transmission Fluid
A.T-F. @ Checking point D; : Drive range 1st gear 'x<) Always replace after every disas- D> : Drive range 2nd gear :
Sealing point
Drive range 3rd gear
Ds sembly. Ea) Apply petroleum jelly. D. : Drive range 4th gear Apply A.T.F. O.D. : Overdrive * Select with proper thickness. 2» : 2nd range 2nd gear Ww Adjustment is required. 2, : 2nd range 1st gear S.D.S. Service Data and Specifications 15 : 1st range 2nd gear L.H., R.H Left-Hand, Right-Hand 1; : 1st range 1st gear
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.