Workshop Manuals Factory service & repair Nissan and Datsun
01 QUICK REFERENCE INDEX02 Front Cover03 Foreword04 Table of Contents05 General Information06 Windshield Header Trim07 Windshield Header Molding08 Weatherstrips and Retainers09 Rear Seat10 Quarter Trim Panel11 Quarter Window and Regulator12 Door and Door Window13 Seat Belts14 Back and Quarter Belt Moldings15 Headliner Assembly16 Top Cover Assembly17 Backlite Assembly18 Stay Pads, Side and Rear19 No. 1 Bow20 No. 2 Bow21 No. 3 Bow22 No. 4 Bow23 Rear and Side Rail24 Hydraulic System25 Electrical26 Deck Lid Hinge and Trunk Trim27 Body Structural28 Index29 Back Cover30 QUICK REFERENCE CHART
Nissan and Datsun Nissan 240SX 1991-92 Workshop Manual01 · QUICK REFERENCE INDEX
01 · General

OIL PAN - Nissan 240SX 1991-1992 Workshop Manual

Make
Nissan and Datsun
Model
240SX Nissan 240SX 1991-92 Workshop Manual
Section
General › OIL PAN - Nissan 240SX 1991-1992 Workshop Manual
QUICK REFERENCE INDEXOIL PAN - Nissan 240SX 1991-1992 Workshop Manual

OIL PAN

OIL PAN

Removal Filler cap

1. Raise vehicle and support it with safety.stands.

2. Drain engine oil.

Remove the following parts. '. "Loosen Power steering tube Front stabilizer bar securing bolts and nuts from side ~~ ummm ys aaes VA <a, member. Pak Both left and right side engine mounting bolts. Refer to

“ENGINE REMOVAL”.

Gussets Disconnect lower steering joint. | Remove front suspension member. / CA ALTLSORY

2: Remove bolts or nuts.

nw j| \ SEM608D Za

NeW {> RSy ZB O G =

Remove oil pan. Insert Tool between cylinder block and oil pan. Do not drive seal cutter into oil pump or rear oil seal retainer portion, or aluminum mating face will be damaged. Do not insert screwdriver, or oil pan flange will be de- formed. KV10111100 (J37228)

Slide Tool by tapping its side with

a hammer, and remove

oil pan.

KV10111100- | (J37228) | | SEM257D EM-9

Parts & tools for this job For Nissan 240SX

As an Amazon Associate we earn from qualifying purchases.