Differential Carrier - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › Differential Carrier - Nissan 240SX 1991-1992 Workshop Manual
Differential Carrier
DISASSEMBLY
Pre-inspection Before disassembling final drive, perform the following inspection. Total preload e 1) Turn drive pinion in both directions several times to set bearing rollers. 2) Check total preload with Tool. Tool number: ST3127S000 (See J25765-A) Total preload:
1.4 - 1.7 Nem (14 - 17 kg-cm, 12 - 15 in-Ib) >=
Ring gear to drive pinion backlash Check ring gear-to-drive pinion backlash with a dial indicator at several points. Ring gear-to-drive pinion backlash:
0.10 - 0.15 mm (0.0039 - 0.0059 in)
SPD513 Ring gear runout Check runout of ring gear with a dial indicator. Runout limit: 0.05 mm (0.0020 in) Tooth contact Check tooth contact. (Refer to Adjustment.)
Differential Carrier
Using two 45 mm spacers, mount carrier on Tool.
1. Tool number: KV38100800 ( — _ §)
SPD975
2. Paint or punch matchmarks on one side of the side bearing cap so it can be properly reinstalled. Bearing caps are line-board during manufacture. Replace them in their proper positions.
PD-13
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.