TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
TROUBLE DIAGNOSES
TROUBLE DIAGNOSES
Electrical Components Inspection (Cont’d)
A.A.C. VALVE
@e Check A.A.C. valve resistance. Resistance: Approximately 100
SEF3521 e@ Check plunger for seizing or sticking. e Check for broken spring.
SEF747K
DETONATION SENSOR
1. Disconnect detonation sensor sub-harness connector. {albh Detonation sensor qa terminal
2. Check continuity between terminal @ and ground. TS. Continuity should exist. DISCONNECT e it is necessary to use an ohmmeter which can measure more than 10 MQ.
SEF854J INJECTOR
1. Disconnect injector harness connector.
2. Check resistance between terminals as shown in the figure. Resistance: Approximately 11 [at 20°C (68°F)] If N.G., replace injector.
SEF745K
NEUTRAL SWITCH
Check continuity between terminals as shown in the figure.
| Conditions | Continuity |
|---|---|
| Shift to neutral position | Yes |
| Shift to other position | No |
If N.G., replace neutral switch. switch O.D. switch Neutral switch SEF343H
EF & EC-187
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.