TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
TROUBLE DIAGNOSES
TROUBLE DIAGNOSES
Diagnostic Procedure 29 (Cont'd)
Bactive test
CL) t - N.G. EGR CONT SoL/v OFF
| Repair harness or connectors. yr CUIT.
CHECK OUTPUT SIGNAL CIR
1) Turn ignition switch ‘OFF’.
===== MONITOR =====
CAS+RPM (REF)
687rpm 2) Disconnect E.C.U. harness connector. 3) Check harness continuity be- tween E.C.U. terminalG@opand |
ON ]Lonorr | Oita
terminal @ .
SEF731K Continuity should exist. O.K. ' y
CHECK COMPONENT
N.G. ,| Replace E.G.R. & canister con- (E.G.R. & canister contro! sole- trol solenoid valve. noid valve). 1) Reconnect E.G.R. & canister control sole- noid valve harness connector and E.C.U. harness connector. 2) Start engine. 3) Turn E.G.R. control solenoid valve “ON” and “OFF” in “ACTIVE TEST” mode with CONSULT and check operating sound. OR (Ey Refer to ‘Electrical Com-
e=6 ponents Inspection’.
(See page EF & EC-185.) O.K. ‘ y Check resistance of exhaust gas temperature sensor. (See page EF & EC-186.)
y Check E.C.U. pin terminals for damage or the connection of E.C.U. harness connector.
EF & EC-122
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.