PROPELLER SHAFT - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › PROPELLER SHAFT - Nissan 240SX 1991-1992 Workshop Manual
PROPELLER SHAFT
PROPELLER SHAFT
‘Installation + Painted mark~
YIN QA
@ Temporarily install differential companion flange and flange Painted mark -; yoke so that their alignment marks are located as close to each other as possible. @ Turn propeller shaft until alignment marks face straight upward. Securely fasten propeller shaft so that lower side wall of concave flange yoke will touch lower side wall of convex companion flange.
SPD902 Inspection @ Inspect propeller shaft runout. If runout exceeds specifica- tions, replace propeller shaft assembly. Runout limit: 0.6 mm (0.024 in)
SPD106 @ Inspect journal axial play. If the play exceeds specifications, replace propeller shaft assembly. Journal axial play: 0 mm (0 in)
SPD874 Disassembly
CENTER BEARING
1. Put matchmarks on flanges, and separate 2nd tube from 1st tube. »
SPD109
2. Put matchmarks on the flange and shaft. Matchmark \\
SPD110
PD-7
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.