REPAIR FOR COMPONENT PARTS - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › REPAIR FOR COMPONENT PARTS - Nissan 240SX 1991-1992 Workshop Manual
REPAIR FOR COMPONENT PARTS
REPAIR FOR COMPONENT PARTS
Oil Pump (Cont'd)
4. While holding cam ring and spring lift out cam ring spring. @ Be careful not to damage oil pump housing. @ Hold cam ring spring to prevent it from jumping.
Remove cam ring and cam ring spring from oil pump
5. housing.
SAT653A
6. Remove pivot pin from control piston and remove control piston assembly.
Remove oil seal from oil pump housing.
7. @ Be careful not to scratch oil pump housing.
SAT655A INSPECTION Oil pump cover, rotor, vanes, control piston, side seals, cam ring and friction ring @ Check for wear or damage.
SATE656A
AT-116
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.