Differential Carrier (Cont'd) - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › Differential Carrier (Cont'd) - Nissan 240SX 1991-1992 Workshop Manual
Differential Carrier (Cont'd)
ASSEMBLY
Differential Carrier (Cont'd)
16. Check total preload with Tool. When checking preload, turn drive pinion in both directions several times to seat bearing rollers correctly. Total preload: Value more than 0.29 N-m (3.0 kg-cm, 2.6 in-lb) added on measured value of drive pinion preload @ If preload is too great, remove the same amount of shim from each side. @ lf preload is too small, add the same amount of shim to each side. . SPDO56A Never add or remove a different number of shims for each side as it will change ring gear to drive pinion backlash.
17. Recheck ring gear to drive pinion backlash because increase or decrease in thickness of shims will cause change of ring gear to pinion backlash. @ If backlash varies excessively in different places, foreign matter may be caught between the ring gear and the differential case. @ lf the backlash varies greatly when the ring gear runout is within a specified range, replace the hypoid gear set or differential case.
18. Check tooth contact. Refer to ADJUSTMENT.
PD-30
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.