TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
TROUBLE DIAGNOSES
TROUBLE DIAGNOSES
Self-diagnosis (Cont'd)
FLUID TEMPERATURE SENSOR CIRCUIT AND A/T
CONTROL UNIT POWER SOURCE CIRCUIT CHECKS
Fluid temperature switch sensor G F Terminal cord / use assembly
CHECK A/T CONTROL
N.G. | Check the following items.
@ Harness continuity between
UNIT POWER SOURCE.
r]
1. x
ignition switch and A/T con-
ror) 3335 (E
trol unit
A/T control unit a @ Ignition switch and fuse
2. Check voltage between A/T
— Refer to section EL.
control unit terminals @) , Q) SAT972B and ground. Battery voltage should exist. — tr fq |L_canrr_[o] connector | - 4 9 O.K. é aT |
CHECK FLUID TEMPERA-
NG. 1. Remove control valve cover.
Git | G/L
TURE SENSOR WITH
2. Check the following items.
TERMINAL CORD ASSEMBLY
@ Fluid temperature sensor
1. — Refer to ‘Electrical Com- 1 ® (Gr a | —— ponents Inspection”’. @ Harness continuity of terminal = satosss | | 2. Disconnect terminal cord cord assembly assembly connector in engine BY solenoids r . Fs compartment.
3. Check resistance between TS. harness \133[38]_/ connector —7-~\ DISCONNECT terminals 63) and @5) when €:)
A/T is cold.
w =«8B Resistance: Cold [20°C (68°F)] Approximately 2.5 kQ
4. Reinstall any part removed. O.K. SAT976D
AT-52
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.