REPAIR FOR COMPONENT PARTS - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › REPAIR FOR COMPONENT PARTS - Nissan 240SX 1991-1992 Workshop Manual
REPAIR FOR COMPONENT PARTS
REPAIR FOR COMPONENT PARTS
Control Valve Lower Body (Cont’d)
DISASSEMBLY
1. Remove valves at parallel pins.
2. Remove valves at retainer plates. For removal procedures, refer to “DISASSEMBLY” of Con- trol Valve Upper Body.
SAT838A INSPECTION Valve springs
@ Check each valve spring for damage or deformation. Also
measure free length and outer diameter. diameter
Numbers of each valve spring listed in table below are the
@ Outer <: same as those in the figure on AT-138. D : Free length Q
SAT829A
Inspection standard: Unit: mm (in)
| Parts | Item | Part No. | Q | D | |
|---|---|---|---|---|---|
| oO) | Modifier accumulator piston spring | 31742-41X15 | 30.5 (1.201) | 9.8 (0.386) | |
| Q) | 1st reducing valve spring | 31756-41X05 | 25.4 (1.000) | 6.75 (0.2657) | |
| (3) | 3-2 timing valve spring | 31742-41 X08 | 20.55 (0.8091) | 6.75 (0.2657) | |
| (4) | Servo charger valve spring | 31742-41 X06 | 23.0 (0.906) | 6.7 (0.264) |
@ Replace valve springs if deformed or fatigued. Control valves @ Check sliding surfaces of control valves, sleeves and plugs for damage.
ASSEMBLY Install contro! valves. @
For installation procedures, refer to “ASSEMBLY” of Control
Valve Upper Body.
SAT838A AT-139
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.