TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
TROUBLE DIAGNOSES
TROUBLE DIAGNOSES
Diagnostic Procedure 6 — Hard to Start or Impossible to Start under Normal 6
Conditions (Cont’d)
6) |
CHECK SPARK PLUGS.
N.G. ,} Repair or replace spark Remove the spark plugs and check for plug(s). fouling, etc. O.K. v
CHECK E.G.R. CONTROL VALVE.
N.G. y} Repair or replace. Check E.G.R. control valve for sticking. SEF879J 8] v
CHECK E.C.U. HARNESS CONNECTOR.
[N.G. p| Repair or replace. Check the E.C.U. pin terminals for dam- age or poor connection of E.C.U. har- ness connector. O.K. v 9)
CHECK E.C.U. POWER SUPPLY AND
-—_L.G. ,| Repair or replace.
GROUND CIRCUIT.
Refer to page EF & EC-93. SEC547A O.K.
10) Vv
TRY A KNOWN GOOD E.C.U.*
INSPECTION END
*: E.C.U. may be the cause of a problem, but this is rarely the case.
EF & EC-69
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.