REPAIR FOR COMPONENT PARTS - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › REPAIR FOR COMPONENT PARTS - Nissan 240SX 1991-1992 Workshop Manual
REPAIR FOR COMPONENT PARTS
REPAIR FOR COMPONENT PARTS
Forward and Overrun Clutches (Cont’d)
@ Align notch in forward clutch piston with groove in forward clutch drum.
SAT867A
2. Install overrun clutch by turning it slowly and evenly. @ Apply A.T.F. to inner surface of forward clutch piston.
SAT868A @ Measurement of clearance between retaining plate and snap ring of overrun clutch Specified clearance: Standard
1.0 - 1.4 mm (0.039 - 0.055 in) Allowable limit
2.0 mm (0.079 in) Retaining plate: Refer to S.D.S.
@ Measurement of clearance between retaining plate and snap ring of forward clutch Specified clearance: Standard
0.45 - 0.85 mm (0.0177 - 0.0335 in) Allowable limit
1.85 mm (0.0728 in) Retaining plate: Refer to S.D.S. Feeler gauge ‘1 NOU)
AT-149
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.