SUPER HICAS SYSTEM — Trouble Diagnoses - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › SUPER HICAS SYSTEM — Trouble Diagnoses - Nissan 240SX 1991-1992 Workshop Manual
SUPER HICAS SYSTEM — Trouble Diagnoses
SUPER HICAS SYSTEM — Trouble Diagnoses
Self-diagnosis (When CONSULT is not used)
SELF-DIAGNOSIS PROCEDURES
1. Input starting conditions for self-diagnosis. (1) Turn ignition switch ‘‘OFF’’. (2) Set shift lever to ‘“‘P’’ or ‘‘N” position (A/T model), or ‘‘Neutral’’ position (M/T model). Turn ignition switch ‘‘ON’’. Immediately start engine. Turn steering wheel from left to right (at least 20° from the neutral position ) 5 times or more, then depress foot brake pedal at least 5 times all within 10 seconds after ignition switch has been turned “ON”. Input self-diagnosis item. Depress and release foot brake pedal. Turn steering wheel from left to right (at least 20°) from the neutral position. (M/T model) Depress clutch pedal and move gear shift lever to any position other than Neutral land return to Neutral. Release clutch pedal. (A/T model) Disengage and engage parking brake lever. Move shift lever to any position other than Neutral or Parking and return to Parking. Move car at least 3 meters (10 ft) forward and proceed at an indicated speed of at least 2 km/h (1 MPH) in self-diagnosis mode.
3. The self-diagnosis mode will then appear in the ‘‘HICAS” warning lamp. When all systems are normal: HICAS warning lamp flashes at 0.25-second intervals.
ST-57
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.