TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
TROUBLE DIAGNOSES
TROUBLE DIAGNOSES
A/T Shift Lock System (Cont'd)
© =
CONNECT a
aoe A Gi:
| Check harness continuity 5
CHECK OUTPUT SIGNAL
between shift lock solenoid .
ammn—|10
(KEY UNLOCK SIGNAL
Key lock solenoid!
| CAUSED BY IGNITION
harness terminal (0) and control unit harness terminal (0. harness connector SIGNAL). o O.K. N.G. Noo y Repair harness or connector. = SAT613C Check voltage between key lock solenoid harness terminal and ground at the moment » ignition key is turned from ON Replace control unit. to OFF. Battery voltage should exist for approximately 0.1 seconds. O.K. . Ca i OF WY SAT632C = \
1. Push selector lever button with brake pedal depressed.
2. &, When turning ignition key, keep selector lever button CONNECT a pushed and brake pedal €> depressed. 4 ¥ Key lock N.G. solenoid
CHECK OUTPUT SIGNAL
y Replace control unit. harness
(KEY UNLOCK SIGNAL
connector
CAUSED BY DETENTION
SWITCH—KEY). (OF Check voltage between key lock solenoid harness terminal SAT633C and ground at the moment selector lever button is released. Battery voltage should exist for approximately 0.1 seconds. O.K. y N.G. Check key lock solenoid. Replace key lock solenoid. (Refer to “COMPONENT CHECK”) O.K. D AT-98
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.