REPAIR FOR COMPONENT PARTS - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › REPAIR FOR COMPONENT PARTS - Nissan 240SX 1991-1992 Workshop Manual
REPAIR FOR COMPONENT PARTS
REPAIR FOR COMPONENT PARTS
Reverse Clutch (Cont'd)
@ Do not align snap ring gap with spring retainer stopper.
Stopper SAT850A
5. Install drive plates, driven plates, retaining plate and dish Snap ring plate. Retaining plate
Drive plate 3 . =| _}+Driven plate
Dish plate
SAT851A
6. Install snap ring.
SAT842A
7. Measure clearance between retaining plate and snap ring. If not within allowable limit, select proper retaining plate. Specified clearance: Standard
0.5 - 0.8 mm (0.020 - 0.031 in) Allowable limit
1.2 mm (0.047 in) Retaining plate: Refer to S.D.S.
SAT852A
8. Check operation of reverse clutch. Refer to ‘“‘DISASSEMBLY”’ of Reverse Clutch.
SAT841A AT-143
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.