REPAIR FOR COMPONENT PARTS - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › REPAIR FOR COMPONENT PARTS - Nissan 240SX 1991-1992 Workshop Manual
REPAIR FOR COMPONENT PARTS
REPAIR FOR COMPONENT PARTS
High Clutch (Cont'd) KV31102400 @ Removal and installation of return spring (J34285 and J34285-87)
SAT855A @ Inspection of high clutch return springs 5 £ Ss} Inspection standard: Unit: mm (in) 5 Oo | ; Q : Free length
| Part No. | Q | D |
|---|---|---|
| 31505-21 X03 | 22.1 (0.870) | 11.6 (0.457) |
SAT829A Thickness @ Inspection of high clutch drive plate Thickness of drive plate: Standard Facing
1.6 mm (0.063 in) Wear limit
1.4 mm (0.055 in) Core plate.
SAT845A @ Measurement of clearance between retaining plate and snap Feeler gauge ring Specified clearance: AZ "1. Standard
tan << JU n
1.8 - 2.2 mm (0.071 - 0.087 in)
4 6
he \ yy
Allowable limit
i iN
3.0 mm (0.118 in)
i S ee y
Retaining plate:
| === ip)
Refer to S.D.S.
Ye ) “ \\ SAT858A
AT-138
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.