Workshop Manuals Factory service & repair Nissan and Datsun
01 QUICK REFERENCE INDEX02 Front Cover03 Foreword04 Table of Contents05 General Information06 Windshield Header Trim07 Windshield Header Molding08 Weatherstrips and Retainers09 Rear Seat10 Quarter Trim Panel11 Quarter Window and Regulator12 Door and Door Window13 Seat Belts14 Back and Quarter Belt Moldings15 Headliner Assembly16 Top Cover Assembly17 Backlite Assembly18 Stay Pads, Side and Rear19 No. 1 Bow20 No. 2 Bow21 No. 3 Bow22 No. 4 Bow23 Rear and Side Rail24 Hydraulic System25 Electrical26 Deck Lid Hinge and Trunk Trim27 Body Structural28 Index29 Back Cover30 QUICK REFERENCE CHART
Nissan and Datsun Nissan 240SX 1991-92 Workshop Manual01 · QUICK REFERENCE INDEX
01 · General

TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual

Make
Nissan and Datsun
Model
240SX Nissan 240SX 1991-92 Workshop Manual
Section
General › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
QUICK REFERENCE INDEXTROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual

TROUBLE DIAGNOSES

TROUBLE DIAGNOSES

A/T Shift Lock System (Cont’d)

N.G.

Check the following items: Brake pedal

CHECK INPUT SIGNAL

(DETENTION SWITCH—SHIFT).

1. Harness continuity between WW control unit harness terminal

1.

(5) and detention switch har-

~~, ness terminal ()

2. Harness continuity between fe] 2. Check voltage between detention switch harness control unit harness ter- terminal (f) and key switch minal G) and ground with harness terminal ((}) brake pedal depressed and Control unit L/B

3. Detention switch—shift terminal selector lever button (Refer to “COMPONENT pushed. CHECK’”’.) Battery voltage should exist. . Check voltage between

control unit harness ter-

minal (5) and ground with Brake pedal selector lever set in any We position except ‘’P’’. When selector lever cannot SAT987D be moved from “’P”’ posi- tion with brake pedal depressed, push shift lock release knob. Battery voltage should exist. R/G J Control unit 0 0K. terminal (aun war, T N.G.

Check the following items: Ww

CHECK INPUT SIGNAL

(STOP LAMP SWITCH).

1. Harness continuity between control unit harness terminal @) yo SAT988D (3) and stop lamp switch ee harness terminal @)

2. Stop lamp switch @ Check voltage between con- (Refer to “COMPONENT trol unit harness terminal () CHECK”) and ground. Brake pedal Voltage Depressed Battery voltage Released OV

TT] O.K. v SAT630C Set selector lever in ‘’P’’ position.

AT-93

Parts & tools for this job For Nissan 240SX

As an Amazon Associate we earn from qualifying purchases.