Workshop Manuals Factory service & repair Nissan and Datsun
01 QUICK REFERENCE INDEX02 Front Cover03 Foreword04 Table of Contents05 General Information06 Windshield Header Trim07 Windshield Header Molding08 Weatherstrips and Retainers09 Rear Seat10 Quarter Trim Panel11 Quarter Window and Regulator12 Door and Door Window13 Seat Belts14 Back and Quarter Belt Moldings15 Headliner Assembly16 Top Cover Assembly17 Backlite Assembly18 Stay Pads, Side and Rear19 No. 1 Bow20 No. 2 Bow21 No. 3 Bow22 No. 4 Bow23 Rear and Side Rail24 Hydraulic System25 Electrical26 Deck Lid Hinge and Trunk Trim27 Body Structural28 Index29 Back Cover30 QUICK REFERENCE CHART
Nissan and Datsun Nissan 240SX 1991-92 Workshop Manual01 · QUICK REFERENCE INDEX
01 · General

DISCHARGING, EVACUATING, CHARGING AND CHECKING - Nissan 240SX 1991-1992 Workshop Manual

Make
Nissan and Datsun
Model
240SX Nissan 240SX 1991-92 Workshop Manual
Section
General › DISCHARGING, EVACUATING, CHARGING AND CHECKING - Nissan 240SX 1991-1992 Workshop Manual
QUICK REFERENCE INDEXDISCHARGING, EVACUATING, CHARGING AND CHECKING - Nissan 240SX 1991-1992 Workshop Manual

DISCHARGING, EVACUATING, CHARGING AND CHECKING

DISCHARGING, EVACUATING, CHARGING AND CHECKING

Inspection for Refrigerant Leaks (Cont’d) Example

INSPECTION POINTS

Check carefully each of the tube joints. To check, wipe the Low-pressure 7 Cooling unit portion to be checked with waste cloth, and move the tester service valve probe all around the joint. High-pressure service valve Compressor Check the shaft seals and bolt holes, and also around the magnet clutch. Receiver drier Thermal protector Check the pressure valve, safety valve and the fusible plug x | mounts. Compressor Dual-pressure Service valve NS Check all around the service valves. Condenser W , © Ensure that the valve core is not loose. The service valve cap must be attached to the valve (to prevent leak). Also check that there are no foreign objects inside the cap. ‘1S

Inside of cooling unit

O RHA606B g To check, insert the leak tester probe into the drain hose immediately after stopping the engine. (Keep the probe inserted for more than 10 seconds.)

HA-35

Parts & tools for this job For Nissan 240SX

As an Amazon Associate we earn from qualifying purchases.