TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
TROUBLE DIAGNOSES
TROUBLE DIAGNOSES
Self-diagnosis (Cont’d)
@
N.G. Check harness continuity be-
CHECK INPUT SIGNAL OF
tween A/T control unit and
FLUID TEMPERATURE
terminal cord assembly. SENSOR.
1. A W%
2. @ Select ’E.C.U. INPUT SIGNALS”. Read out the value @ of “FLUID TEMPER- THEGITTLE SEH. au
ATURE SENSOR”.
FLUID TEMP SE
1.2u Voltage: BeaTTERY WaLT Lo. dll
Cold [20°C (68°F)] >
Hot [80°C (176° F)]:
Approximately
1.5V > 0.5V OR SAT330C Check voltage between A/T control unit terminal @3) and ground while warming up A/T. Voltage: Cold [20°C (68°F)] > Hot [80°C (176°F)] : Approximately
1.5V > 0.5V
[[_canrt | [CONNECTOR ||
=r lol Tele O.K. 33 CONNECT Vv €>
1. Perform A/T control unit Perform self-diagnosis after N.G. eu Vv input/output signal inspection. driving for a while.
2. If N.G., recheck A/T control )O-K. unit pin terminals for damage X or connection of A/T control
INSPECTION END
unit harness connector.
SAT990B
AT-48
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.