TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
TROUBLE DIAGNOSES
TROUBLE DIAGNOSES
Diagnostic Procedure 5 (Cont'd)
a ff
DISCONNECTe @
H.S. N.G. Push control unit
CHECK POWER SUPPLY
CHECK POWER SUPPLY
Vv connector (40!
FOR A/C ILLUMINATION
FOR ILLUMINATION WITH
O SYSTEM.
LIGHTING SWITCH ON.
| Refer to Hlumintion/Wiring Do approx. 12 volts exist be- Diagram in EL section. tween push control unit harness terminal No. (5) and body ground? RHA428A | O-K. Note X
CHECK BODY GROUND
DISCONNECT
CIRCUIT FOR ILLUMI-
&> NATION. Does contunity exist between push control unit harness termi- Push control unit nal No. and body ground? connector iRIY 16 O 7 O.K. Vv Replace control amp. built-in push control unit. RHA429A
DIAGNOSTIC PROCEDURE 5-2
N.G. Go to Diagnostic Procedure 4.
CHECK MAGNET CLUTCH
OPERATION. Does magnet clutch operate nor- maly when engine ON, A/C switch, fan switch are ON? O.K. v Replace control amp. built-in push control unit.
Note:
If the result is N.G. after checking circuit continuity, repair harness or
connector. HA-94
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.