TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
TROUBLE DIAGNOSES
TROUBLE DIAGNOSES
A/T Shift Lock System (Cont'd)
eo - qn € 24 CONNECT {
CHECK ouTPUT SIGNAL _
|N-S: Check harness continuity (e)
(SHIFT LOCK SOLENOID).
between control unit harness terminal (1D and shift lock Shift lock
1. @) xo L/G harness
solenoid harness terminal (1).
(7\ y,
2. Check voltage between WeSAT608C shift lock harness con-
nector terminal (1) and
body ground.
(a) E> vi.
CONNECT Brake pedal Voltage Depressed Battery voltage (e)} Released OV 1]
3. LiG @ Shift lock & harness }) connector
4. Check voltage between 6 shift lock harness con- nector terminal (1) and SAT989D ground with brake pedal DISCONNECT
Cu) EE) Vi
depressed. OV O.K. 4 N.G. Shift lock
CHECK GROUND CIRCUIT
Repair harness or connector. harness
FOR SHIFT LOCK SOLENOID.
connector
1. Disconnect shift lock harness connector.
2. Check continuity between shift lock harness terminal () SATS90D and ground. Continuity should exist. O.K. N.G. Replace A/T shift lock control Check shift lock solenoid. device assembly. (Refer to ‘‘COMPONENT CHECK”’.) O.K. y Reconnect shift lock harness connector.
aS
y N.G.
1. Perform control unit input/ Recheck shift lock operation. output signal inspection test. O.K.
2. If N.G., recheck harness con- ‘
+) nector connection. | AT-94
INSPECTION END
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.