TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
‹ Prev TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop ManualNext › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
QUICK REFERENCE INDEXTROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
TROUBLE DIAGNOSES

TROUBLE DIAGNOSES
A/T Shift Lock System (Cont’d) SHIFT LOCK CONTROL UNIT INSPECTION TABLE (Data are reference values.)
| Terminal No. | Item | Condition | Judgement standard |
|---|---|---|---|
| © | oO | Item | Condition | Judgement standard |
| 1 | ; ; Shift lock signal | SS When selector lever is set (Cx) in “P”’ position and brake pedal is depressed | Battery voltage |
| Except above | OV | ||
| 3 | Stop lamp switch | When brake pedal is depressed When brake pedal is released | Battery voltage OV |
| —_—7 9 | When brake pedal is released | OV | |
| 4 | Power source | 2 Lr] | Battery voltage |
| When key is inserted into key cylinder, set in ““P’’ position and | OV | ||
| 5 | Detention switch (Shift) | selector lever is set in ““P’’ position and selector lever button is released | OV |
| 5 | Detention switch (Shift) | selector lever button is released | |
| Except above | Battery voltage | ||
| 6 | Ignition signal | ~] (Con | Battery voltage |
| When ignition switch is turned from | Battery voltage | ||
| Except above | OV | ||
| 9 — | Ground | _ | _ |
| When ignition switch is turned from ON to LOCK, OFF, or ACC, selector lever is | Battery voltage | ||
| 10 8 | Key unlock signal | to LOCK, OFF, or ACC, selector lever is set in “P’” position and selector lever | Battery voltage (Approximately 0.1 seconds) |
| 10 8 | Key unlock signal | set in “P’” position and selector lever | (Approximately 0.1 seconds) |
| button is released | |||
| Except above | OV | ||
| Key switch | When key is inserted into key cylinder | Battery voltage | |
| 11 | Key switch | When key is removed from key cylinder | OV |
| 9 | When key is inserted into key cylinder, selector lever is set in ‘’P’’ position and | OV | |
| 12 | Detention switch (Key) | selector lever is set in ‘’P’’ position and selector lever button is released | OV |
| 12 | Detention switch (Key) | selector lever button is released | |
| Except above | Battery voltage |
AT-94
‹ Prev TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop ManualNext › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.