TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
TROUBLE DIAGNOSES
TROUBLE DIAGNOSES
Diagnostic Procedure 12
Al
Control unit connector
CONTROL UNIT OR POWER SUPPLY AND GROUND
CIRCUIT (Warning activates but L.E.D. comes off.)
35|34)X 132 29}28)/2 7) |25] 1/2 18)17 15114 11710] 9 716 2] 1
4 INSPECTION START »
2 ©
N.G. | Check if control unit "10A” fuse
CHECK CONTROL UNIT
is blown.
POWER SUPPLY.
SBR174B = No Disconnect control unit con- Yes y Vv
Control unit connector
B) nector.
Repair power
Replace fuse.
Check voltage between control supply harness. unit connector (vehicle side) 35)34)/X]32 29}28|2 7) 25} 2142 18]1 7X ]15}14 11710) 9 7|6 4 211 terminal (1) and body ground with ignition switch turned on. b TS. Wea) O.K. Vv | DISCONNECT N.G. mS
CHECK ALTERNATOR L
Check if other warnings activate. v
TERMINAL VOLTAGE.
Yes No Disconnect control unit con- Vv v SBR175B nector. Malfunc-
Repair harness
Check voltage between control Control unit connector 146 tioning
between alter-
unit connector (vehicle side) alternator.
nator and
bsbalx ax bxfeslzsi2 Xx2slxPxIxi2 of] terminal (5) and body ground hal 7ox<fish 4x pxI1 hol sb] 7 [6 KI4K] 2] 1 control unit. after engine starting. Voltage: 6V or more | TS. O.K. Vv DISCONNECT N.G. €. Check continuity between Repair ground harness. control unit connector (vehicle
side) terminal @) and body
ground with ignition switch SBR176B “OFF”. O.K. v Replace control unit.
BR-51
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.