METER AND GAUGES - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › METER AND GAUGES - Nissan 240SX 1991-1992 Workshop Manual
METER AND GAUGES
METER AND GAUGES
Inspection/Fuel Gauge and Water Temperature
Gauge
C INSPECTION START (+)
re
need FETE |
ol O.K. type -=y il] Digital |t 4 y type - 5 ; rE
CHECK POWER SOURCE.
Check the following items. y Ey) Ut 1) Turn ignition switch “ON”. N.G.! 1) Harness continuity between 2) Check voltage between —> battery terminal and SELS00P
terminal -@) and ground.
combination meter
Needle type Battery voltage should exist. 2) Ignition relay () (Temp) es (Fuel) |. 3) Fusible link and fuse O.K. 4) Ignition switch N.G. 2 © (Fuel)
CHECK GAUGE OPERATION.
>» Repair or replace gauge. 1) Turn ignition switch “ON”. 2) Connect terminals (8) (Fuel), (B® (Temp.) and ground with
e () and © : Fuel gauge .
wire for less than 10 seconds. (8) and (©: Water temperature gauge cri go1p 3) Check operation of gauge. Gauge should move smoothly G) (Temp.) type Digital ig ¥P (Fuel) to full scale.
O.K. v N.G. Check harness continuity >| Repair or replace. © (Fuel) between component and combination meters (C) (Fuel), © (Temp.).
e ®) and © : Fuel gauge
8 and © : Water temperature gaug : uge SEL902P O.K.. N.G.
CHECK COMPONENT.
Repair or replace. Refer to FE section. (Fuel gauge) Check gauge units and harness. Refer to “Fuel Tank Gauge Unit Check” or “Thermal Transmitter Check”’.
O.K. N Reinstall any part removed.
4 INSPECTION END +)
EL-57
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.