ENGINE MAINTENANCE - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › ENGINE MAINTENANCE - Nissan 240SX 1991-1992 Workshop Manual
ENGINE MAINTENANCE
ENGINE MAINTENANCE
Checking Drive Belts
HICAS pump rear lock nut (with SUPER HICAS) ~ my (2.0 - 2.3, \ J, : , 20 - 23 : | 14 - 17) Power steering oil pump
bolt
Air conditioner
compressor P Idler pulley
Alternator —%
Vv: Check point (C): Nem (kg-m, ft-lb) SMA387C
1. Inspect for cracks, fraying, wear or oil adhesion. If neces- sary, replace with a new one.
2. Inspect drive belt deflections by pushing on the belt midway between pulleys. Adjust if belt deflections exceed the limit. Belt deflection: inspect drive belt deflections when engine is cold. Unit: mm (in)
| Used belt deflection | Deflection | ||
|---|---|---|---|
| . Limit | Deflection after . adjustment | of belt new be | |
| Alternator | 11 (0.43) | 7-8 (0.28 - 0.31) | 6-7 (0.24 - 0.28) |
| Air conditioner | 12 (0.47) | 7.5-8.5 | 6.5 - 7.5 |
| compressor | (0.295 - 0.335) | (0.256 - 0.295) | |
| Power steering oil | |||
| pump | |||
| Without SUPER | 13 (0.51) | 7.5 - 8.5 | 6.5 - 7.5 |
| HICAS | , | (0.295 - 0.335) | (0.256 - 0.295) |
| With SUPER | 9 (0.35) | 6.5 - 7.5 | 5.5 - 6.5 |
| HICAS | (0.256 - 0.295) | (0.217 - 0.256) | |
| Applied pushing force | 98 N (10 kg, 22 Ib) |
MA-8
Parts & tools for this job For Nissan 240SX
- PARTEngine gasket setSearch: Nissan 240SX engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
As an Amazon Associate we earn from qualifying purchases.