CHASSIS AND BODY MAINTENANCE - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › CHASSIS AND BODY MAINTENANCE - Nissan 240SX 1991-1992 Workshop Manual
CHASSIS AND BODY MAINTENANCE
CHASSIS AND BODY MAINTENANCE
LUBRICATING LOCKS, HINGES AND HOOD LATCHES
Fastback
Trunk lid striker
SMA999B
CAUTION:
1. All seat belt assemblies, including retractors and . attaching hardwares such as guide rail set, etc.,
Check anchors for loose mounting.
should be inspected after any collision. Nissan
recommends that all seat belt assemblies in use Check belts for damage. during a collision be replaced unless the colli- sion was minor and the belts show no damage and continue to operate properly. Seat belt assemblies not in use during a collision should if either damage also be inspected and replaced or improper operation is noted. Check retractor
2. If the condition of any component of a seat for smooth belt is questionable, do not have seat belt : repaired, but replaced as a belt assembly.
operation. \
3. If webbing is cut, frayed, or damaged, replace
belt assembly.
<
4. Do not spill drinks, oil, etc. on inner lap belt ) buckle. Never oil tongue and buckle.
5. Use a NISSAN genuine seat belt assembly. For automatic seat belt details,refer to BF section. 0c) Anchor bolt 24 - 31N-m (2.4 - 3.2 kg-m, 17 - 23 ft-lb) For automatic seat belt, refer to Rear seat belt BF section. Check function of buckles and tongues when buckled and released.
Front seat belt SMA430C . MA-19
Parts & tools for this job For Nissan 240SX
- PARTOil filterSearch: Nissan 240SX oil filter
- TOOLOil filter wrenchSearch: oil filter wrench
- FLUIDEngine oilSearch: Nissan 240SX engine oil
As an Amazon Associate we earn from qualifying purchases.