REPAIR FOR COMPONENT PARTS - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › REPAIR FOR COMPONENT PARTS - Nissan 240SX 1991-1992 Workshop Manual
REPAIR FOR COMPONENT PARTS
REPAIR FOR COMPONENT PARTS
Forward and Overrun Clutches (Cont'd)
Removal and installation of return springs @
KV31102400 (J34285 and J34285-87) SAT864A
@ Inspection of forward clutch and overrun clutch return
springs diameter Inspection standard: Unit: mm (in) Outer Part No. Q D : D 31505-41X01
35.77 (1.4083)
9.7 (0.382) : Free length Q em - =_ SAT829A Inspection of forward clutch drive plates @ Thickness Thickness of drive plate: Standard Facing
2.0 mm (0.079 in) Wear limit
1.8 mm (0.071 in) Core plate
SAT845A @ Inspection of overrun clutch drive plates Thickness Thickness of drive plate: Standard
2.0 mm (0.079 in) Facing Wear limit i=,
1.8 mm (0.071 in)
Core plate
SAT845A @ Installation of forward clutch piston and overrun clutch piston
1. Install forward clutch piston by turning it slowly and evenly. @ Apply A.T.F. to inner surface of clutch drum.
SAT866A AT-148
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.