Workshop Manuals Factory service & repair Nissan and Datsun
01 QUICK REFERENCE INDEX02 Front Cover03 Foreword04 Table of Contents05 General Information06 Windshield Header Trim07 Windshield Header Molding08 Weatherstrips and Retainers09 Rear Seat10 Quarter Trim Panel11 Quarter Window and Regulator12 Door and Door Window13 Seat Belts14 Back and Quarter Belt Moldings15 Headliner Assembly16 Top Cover Assembly17 Backlite Assembly18 Stay Pads, Side and Rear19 No. 1 Bow20 No. 2 Bow21 No. 3 Bow22 No. 4 Bow23 Rear and Side Rail24 Hydraulic System25 Electrical26 Deck Lid Hinge and Trunk Trim27 Body Structural28 Index29 Back Cover30 QUICK REFERENCE CHART
Nissan and Datsun Nissan 240SX 1991-92 Workshop Manual01 · QUICK REFERENCE INDEX
01 · General

TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual

Make
Nissan and Datsun
Model
240SX Nissan 240SX 1991-92 Workshop Manual
Section
General › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
QUICK REFERENCE INDEXTROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual

TROUBLE DIAGNOSES

TROUBLE DIAGNOSES

A/T Shift Lock System (Cont’d)

| © «m €> 34 CONNECT { N.G.

CHECK OUTPUT SIGNAL

Check harness continuity (e)

(SHIFT LOCK SOLENOID).

between control unit harness terminal (1) and shift lock Shift lock L/G

solenoid harness terminal (1).

harness __/

2. Check voltage between WO shift lock harness con-

nector terminal a) and

SAT608C body ground. ame (4 Brake pedal Voltage Depressed Battery voltage fe) Released OV 1] Shift lock O < &. L/G harness J connector )

4. Check voltage between ‘6 shift lock harness con- nector terminal (1) and SAT989D ground with brake pedal DISCONNECT ©

qi) ED Vr.

depressed. OV O.K. 14) 19 N.G.

CHECK GROUND CIRCUIT

Shift lock Repair harness or connector. harness

FOR SHIFT LOCK SOLENOID.

connector

1. Disconnect shift lock harness connector.

2. Check continuity between

shift lock harness terminal Q)

SAT990D and ground. Continuity should exist. O.K. Vv N.G. Replace A/T shift lock control Check shift lock solenoid. device assembly. (Refer to ‘“COMPONENT CHECK”) O.K. \ Reconnect shift lock harness connector.

q N.G.

1. Perform control unit input/ Recheck shift lock operation. output signal inspection test. | O.K.

2. \f N.G., recheck harness con- \ nector connection.

INSPECTION END

( AT-88

Parts & tools for this job For Nissan 240SX

As an Amazon Associate we earn from qualifying purchases.