TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
TROUBLE DIAGNOSES
TROUBLE DIAGNOSES
Diagnostic Procedure 8 owsconnect Mi10D
(10D C.U. 16-pin
e@) 2 connector C START +) | 34 ‘ Cc O.K. / VIG SOOT
NING LAMP
>(Go to @ below.) 1) Disconnect 16-pin connector from control unit. 2) Check warning lamp. SBF365E = B GoD C.U. 16-pin connector Terminals Result e * 4 @4) - Ground Glow Combination BI | N.G. a <= meter connector N.G. | Xx Lt fs4l_} DISCONNECT. Fs 1) Disconnect connector from +| Repair harness. TS. combination meter. YIG 2) Check continuity. re | OF 153 Terminals | mene - @2 Continuity should exist. HHH] | © : O.K.
Does continuity exist?
Yes ,| Repair harness.
GH for E/D FY/G There will be incorrect grounding. Terminals _ @ - Ground | No
Check battery voltage existence.
NG Repair harness.
SBF366E = For details, refer to POWER Terminals
SUPPLY ROUTING in EL
section. a - Ground B) TS. (Gi
Battery voltage should exist.
| et font
HH connector
q O.K. Combination meter \
Ve iS for W/D
Is warning lamp bulb burn out?
>| Replace bulb.
Yes
OF . Tr No Ho} 91 i @ Kee E/D v y G = es SBFS67E
Is this the second time?
| Replace control unit.
W/D: With Head-up Display No E/D: Without Head-up Display q Reinstall any part removed.
Vv Go to PROCEDURE 2 (START) of Preliminary Check, (See page BF-39.)
BF-54
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.