TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
TROUBLE DIAGNOSES
TROUBLE DIAGNOSES
A/T Shift Lock System (Cont'd)
TT
DIAGNOSTIC PROCEDURE 1
CONNECT [=o €> sis SYMPTOM: HS. Selector lever cannot be moved from “P” range when applying brake pedal or can be moved when releasing brake pedal. Oo |4 Selector lever can be moved from ‘“P” range when key is L t/t removed from key cylinder. VI R/W 1] -
Control unit
CHECK POWER SOURCE.
NG. Check the following items: terminal
1.
1. Harness continuity between = SAT982D (tr) L. battery and control unit harness terminal (4)
2. Fuse
2. Check voltage between con- & trol unit harness terminals CONNECT € > HS.
(@) and ground.
Battery voltage should exist. G/L o Control unit NG terminal
CHECK IGNITION SIGNAL.
> Check the following items:
1.
1. Harness continuity between = battery and control unit harness terminal (6) SAT983D
2. Fuse
2. Check voltage between con-
3. Ignition switch owner trol unit harness terminal 6)
and ground.
&> HS. OV O 9
3. 8
| Control unit
OFF eo (\ terminal |
4. Check voltage between con- c trol unit harness terminal 6) and ground. L SAT9B4D Battery voltage should exist. O.K. N.G.
CHECK GROUND CIRCUIT
y Repair harness or connector.
FOR CONTROL UNIT.
1. &,
2. Disconnect control unit harness connector.
3. Check continuity between control unit harness terminal Q) and ground. Continuity should exist. O.K.
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.