REPAIR FOR COMPONENT PARTS - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › REPAIR FOR COMPONENT PARTS - Nissan 240SX 1991-1992 Workshop Manual
REPAIR FOR COMPONENT PARTS
REPAIR FOR COMPONENT PARTS
Control Valve Assembly (Cont’d)
f. Temporarily assemble lower and upper bodies, using reamer bolt as a guide. Reamer bolt Be careful not to dislocate or drop steel balls, orifice e@ check spring, orifice check valve and pilot filter.
Install and temporarily tighten bolts and tube brackets in
g. their proper locations. Bolt length and location:
| Item | Bolt symbol | a | b | c | d |
|---|---|---|---|---|---|
| Bolt length olt leng | mm (in) | 70 (2.76) | 50 (1.97) | 33 (1.30) | 27 (1.06) |
2. Install solenoids.
a. Attach O-ring and install lock-up solenoid and side plates onto lower body.
ls “Thal
b. Attach O-rings and install 3-unit solenoids assembly onto upper body. a Shift solenoid A —|| >) foe —— i le
Overrun clutch solenoid
c. Attach O-ring and install line pressure solenoid onto upper
body.
3. Tighten all bolts.
SAT667A AT-131
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.