TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
TROUBLE DIAGNOSES
TROUBLE DIAGNOSES
Diagnostic Procedure 4 — Hard to Start or Impossible to Start when the Engine is
G ®
Cold (Cont’d)
y 6 |
Ignition wire
CHECK IGNITION SPARK.
N.G. .| Check ignition coil, power
1. Disconnect ignition wire from rocker transistor unit and their cover. circuits. (See page EF &
2. Connect a known good spark plug to EC-107.) 4 the ignition wire. ~
Spark plug
3. Place end of spark plug against a
v4 i » suitable ground and crank engine.
4. Check for spark. SEF282G O.K. Vv
CHECK SPARK PLUGS.
N.G. »| Repair or replace spark Remove the spark plugs and check for plug(s). fouling, etc. O.K. 8 v
CHECK E.C.U. HARNESS CONNECTOR.
LN.G.,) Repair or replace. Check the E.C.U. pin terminals for dam- age or poor connection of E.C.U. har- SEF879J| | ness connector. O.K. 9) Vv
Repair or replace.
CHECK E.C.U. POWER SUPPLY AND
N.G. Vv
GROUND CIRCUIT.
Refer to page EF & EC-93. O.K. 10 ¥
TRY A KNOWN GOOD E.C.U.*
Vv
INSPECTION END
*. E.C.U. may be the cause of a probiem, but this is rarely the case.
EF & EC-66
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.