REPAIR FOR COMPONENT PARTS - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › REPAIR FOR COMPONENT PARTS - Nissan 240SX 1991-1992 Workshop Manual
REPAIR FOR COMPONENT PARTS
REPAIR FOR COMPONENT PARTS
Reverse Clutch (Cont’d)
Reverse clutch piston No air leakage Air leakage is present.
@ Shake piston to assure that balls are not seized.
Check bail Check ball a=
@ Apply compressed air to check ball oil hole opposite the
return spring to assure that there is no air leakage.
Also apply compressed air to oil hole on return spring side
to assure that air leaks past ball.
Check ball Check ball
SAT846A ASSEMBLY Oil seal
1. Install D-ring and oil seal on piston. @ Apply A.T.F. to both parts.
2. Install piston assembly by turning it slowly and evenly. @ Apply A.T.F. to inner surface of drum.
3. Install return springs and spring retainer.
SAT849A KV31102400
4. Install snap ring while compressing clutch springs. (J34285 and J34285-87)
SAT843A
AT-135
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.