Workshop Manuals Factory service & repair Nissan and Datsun
01 QUICK REFERENCE INDEX02 Front Cover03 Foreword04 Table of Contents05 General Information06 Windshield Header Trim07 Windshield Header Molding08 Weatherstrips and Retainers09 Rear Seat10 Quarter Trim Panel11 Quarter Window and Regulator12 Door and Door Window13 Seat Belts14 Back and Quarter Belt Moldings15 Headliner Assembly16 Top Cover Assembly17 Backlite Assembly18 Stay Pads, Side and Rear19 No. 1 Bow20 No. 2 Bow21 No. 3 Bow22 No. 4 Bow23 Rear and Side Rail24 Hydraulic System25 Electrical26 Deck Lid Hinge and Trunk Trim27 Body Structural28 Index29 Back Cover30 QUICK REFERENCE CHART
Nissan and Datsun Nissan 240SX 1991-92 Workshop Manual01 · QUICK REFERENCE INDEX
01 · General

WIPER AND WASHER - Nissan 240SX 1991-1992 Workshop Manual

Make
Nissan and Datsun
Model
240SX Nissan 240SX 1991-92 Workshop Manual
Section
General › WIPER AND WASHER - Nissan 240SX 1991-1992 Workshop Manual
QUICK REFERENCE INDEXWIPER AND WASHER - Nissan 240SX 1991-1992 Workshop Manual

WIPER AND WASHER

WIPER AND WASHER

Wiper and Washer Adjustment

INSTALLATION Prior to wiper arm installation, turn on wiper switch to operate wiper motor and then turn it “OFF”

1. (Auto Stop). Lift the blade up and then set it down onto glass surface to set the blade center to clearance ‘“L:” & .

‘‘L.”’ immediately before tightening nut.

Eject washer fluid. Turn on wiper switch to operate wiper motor and then turn it “OFF”.

Ensure that wiper blades stop within clearance “Li” & “Le”.

Clearance “L,”: 17.5 - 32.5 mm (0.689 - 1.280 in)

Clearance ‘‘L.”: 25 - 35 mm (0.98 - 1.38 in)

Tighten wiper arm nuts to specified torque.

Front wiper: 17 - 23 N-m (1.7 - 2.3 kg-m, 12 - 17 ft-lb)

Rear wiper: 13 - 18 N-m (1.3 - 1.8 kg-m, 9 - 13 ft-lb)

503 (19.80) *1: 275 (10.83) *2: *3: 425 (16.73) 213 (8.39) *4: 4 144 (5.67) *5: *6: 155 (6.10) Clearance “‘L, ”’ *4 273 (10.75) *7: *2 385 (15.16) *g: Unit: mm (in)

* All the diameters of these circles are

less than 80 (3.15). Glass end SEL425L

*1: 93 (3.66) Clearance *2: 85 (3.35) ee L, ou *3: 38 (1.50) *4: 25 (0.98) Unit: mm (in)

SEL414L

EL-76

Parts & tools for this job For Nissan 240SX

As an Amazon Associate we earn from qualifying purchases.