DESCRIPTION — Refrigeration System - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › DESCRIPTION — Refrigeration System - Nissan 240SX 1991-1992 Workshop Manual
DESCRIPTION — Refrigeration System
DESCRIPTION — Refrigeration System
V-5 Variable Displacement Compressor (Cont'd)
Operation Operation control valve
1. Operation control valve is located in the suction port (low-pressure) side, and opens or closes in response to changes in refrigerant suction pressure. Operation of the valve controls the internal pressure of the crankcase. The angle of the swash plate is controlled between the crankcase’s internal pressure and the pis- ton cylinder pressure. Maximum cooling Refrigerant pressure on the low-pressure side increases with an increase in heat loads. . When this occurs, the control valve’s bellows compress to open the low-pressure side valve and close the high-pressure side valve. This causes the crankcase’s internal pressure to equal the pressure on the low-pressure side and the cylinder’s internal pressure to be greater than the crankcase’s internal pressure. Under this condition, the swash plate is set to the maximum stroke position.
Discharge port
Cylinder Crankcase pressure <+_ Crankcase pressure Suction port Low-pressure valve: Open > 4 Spring pressure Bellows Forces needed to increase stroke
Valve position for lowering crankcase pressure
RHA473C
HA-14
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.