BODY END - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › BODY END - Nissan 240SX 1991-1992 Workshop Manual
BODY END
BODY END
Body Front End (Cont'd)
Hood lock adjustment @ Adjust lock so that hood primary lock meshes at a position where hood is 1 to 1.5 mm (0.039 to 0.059 in) lower than fender. After hood lock adjustment, adjust bumper rubber. @ When securing hood lock, ensure it does not tilt. Striker must be positioned at the center of hood primary lock. e After adjustment, ensure that hood primary and secondary lock operate properly. Hood lock secondary latch hooking length Hood adjustment s More than Q a 5mm Hood (0.20 in) \
Secondary latch
a We fr sy, Bumper rubber adjustment \ e Adjust so that hood is aligned with (C) 21-26 ry fender. [Bumper rubber free height is approx. 20 mm (0.79 in).] (2.1 - 2.7, 15 - 20) a 7 (©) 13 - 16 (1.3 - 1.6, 9 - 12)
(uP
Front side-bumper
Metal clip:
Double-faced * =: Bumper assembly mounting bolts, nuts and clips
adhesive tape
©) : N-m (kg-m, ft-ib)
Clip MBF217A BF-7
Parts & tools for this job For Nissan 240SX
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Nissan touch up paint
- PARTPanel clip assortmentSearch: Nissan panel clips assortment
As an Amazon Associate we earn from qualifying purchases.