REPAIR FOR COMPONENT PARTS - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › REPAIR FOR COMPONENT PARTS - Nissan 240SX 1991-1992 Workshop Manual
REPAIR FOR COMPONENT PARTS
REPAIR FOR COMPONENT PARTS
Reverse Clutch
CTF): Apply A.T.F.
*% : Select with proper thickness.
. : , Driven plate ;
Direction of oil seal
Direction of dish plate
; — —_
( . \
Snap ring
(7
Retaining plate *
i _ Dish plate @TP prive plate ‘ on Snap ring 'x<) & i Spring retainer Return spring Dish plate Drive plate Poa Retaining plate Snap ring es Tri he SATOB2E \ Driven plate
DISASSEMBLY
1. Remove reverse clutch assembly from clutch pack.
High clutch assembly
Reverse clutch assembly SAT840A
2. Check operation of reverse clutch.
a. Install seal ring onto oil pump cover and install reverse clutch. Apply compressed air to oil hole.
b. Check to see that retaining plate moves to snap ring.
c. If retaining plate does not move to snap ring, D-ring or oil seal may be damaged or fluid may be leaking at piston check ball.
SAT841A
AT-133
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.