Differential Carrier (Cont'd) - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › Differential Carrier (Cont'd) - Nissan 240SX 1991-1992 Workshop Manual
Differential Carrier (Cont'd)
ASSEMBLY
Differential Carrier (Cont'd)
Press.
— fe) Suitable spacer sPD896 N
6. Apply multi-purpose grease to cavity at sealing lips of oil seal.
Install front oil seal with Tool. Tool number: KV38100500 ( — )
SPD557
7. Install companion flange, and tighten pinion nut to specified torque with Tool. Make sure that threaded portion of drive pinion and pinion nut are free from oil or grease. Tool number: ST38060002 (J34311)
PD416
8. Turn drive pinion in both directions several times, and measure pinion bearing preload. Pinion bearing preload:
1.1 - 1.4 Nem (11 - 14 kg-cm, 9.5 - 12.2 in-Ib) When pinion bearing preload is outside the specifications, re- place pinion bearing adjusting washer and spacer with a different thickness.
— a V SPDOS56A
9. Select side bearing adjusting washer. Refer to ADJUSTMENT.
10. Install differential case assembly with side bearing outer races into gear carrier.
SPD919 PD-28
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.