ENGINE COOLING SYSTEM - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › ENGINE COOLING SYSTEM - Nissan 240SX 1991-1992 Workshop Manual
ENGINE COOLING SYSTEM
ENGINE COOLING SYSTEM
Cooling Circuit
Throttle chamber Collector G
Thermostat fi
Water pump
\ cylinder block
\ Heater Cylinder head Radiator
Throttle chamber mmm
Water outlet, =[———“| Radiator _| — | | Intake manifold a T ! | | Cylinder head | Water inlet | | | | | Water pump | | | Thermostat | | +----- : Thermostat closed Thermostat housing _ ‘ae (Front cover) : Thermostat open SLC536A
System Check
WARNING: Never remove the radiator cap when the engine is hot; serious burns could be caused by high pressure fluid escaping from the radiator. Wrap a thick cloth around cap and carefully remove the cap by turning it a quarter turn to allow built-up pressure to escape and then turn the cap all the way off.
CHECKING COOLING SYSTEM HOSES
Check hoses for improper attachment, leaks, cracks, damage, loose connections, chafing and deterioration.
LC-7
Parts & tools for this job For Nissan 240SX
- PARTEngine gasket setSearch: Nissan 240SX engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
As an Amazon Associate we earn from qualifying purchases.