POWER STEERING OIL PUMP - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › POWER STEERING OIL PUMP - Nissan 240SX 1991-1992 Workshop Manual
POWER STEERING OIL PUMP
POWER STEERING OIL PUMP
Disassembly
CAUTION: Parts which can be disassembled are strictly limited. Never disassemble parts other than those specified. Disassemble in as clean a place as possible. Clean your hands before disassembly. Do not use rags; use nylon cloths or paper towels. Follow the procedures and cautions in the Service Manual. - When disassembling and reassembling, do not let foreign matter enter or contact the parts.
Remove snap ring, then draw pulley shaft out. —— Be careful not to drop pulley shaft.
Extension bar
Drive shaft
SST010B @ Remove oil seal. Be careful not to damage front housing.
Remove connector.
Be careful not to drop flow control valve.
Front housing
Flow control valve SSTO36A Inspection
PULLEY AND PULLEY SHAFT
If pulley is cracked or deformed, replace it.
if an oil leak is found around pulley shaft oil seal, replace the
seal.
If serration of pulley or pulley shaft is deformed or worn,
replace it.
ST-27
Parts & tools for this job For Nissan 240SX
- PARTOil filterSearch: Nissan 240SX oil filter
- TOOLOil filter wrenchSearch: oil filter wrench
- FLUIDEngine oilSearch: Nissan 240SX engine oil
As an Amazon Associate we earn from qualifying purchases.