SUPER HICAS SYSTEM — Trouble Diagnoses - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › SUPER HICAS SYSTEM — Trouble Diagnoses - Nissan 240SX 1991-1992 Workshop Manual
SUPER HICAS SYSTEM — Trouble Diagnoses
SUPER HICAS SYSTEM — Trouble Diagnoses
Self-diagnosis (When CONSULT is used)
[fs
SELECT DIAG MODE
e Start engine.
| _SELF-DIAG RESULTS
@ Touch START (on CONSULT display). e@ Touch HICAS.
DATA MONITOR
e Touch SELF-DIAG RESULTS. |
ACTIVE TEST
Refer to CONSULT operation manual ‘‘HICAS’’ for details. |
ECU PART NUMBER
SST412B For reference:
| SELECT DIAG MODE
| Recording input/output signals using data monitor function
| SELF-DIAG RESULTS
e Start engine. @ Touch START (on CONSULT display).
| DATA MONITOR
e Touch HICAS.
| ACTIVE TEST
@ Touch DATA MONITOR.
Refer to CONSULT operation manual ‘‘HICAS”’ for details. L || | SST414B
ECU PART NUMBER
Self-diagnosis (When CONSULT is not used)
SELF-DIAGNOSIS PROCEDURES
1. Input starting conditions for self-diagnosis. (1) Turn ignition switch ‘“‘OFF’’. (2) Set shift lever to “P’’ or ‘‘N’” position (A/T model), or Neutral’? position (M/T model). (3) Turn ignition switch ‘‘ON’’. (4) Immediately start engine. (5) Turn steering wheel from left to right (at least 20° from the neutral position ) 5 times or more, then depress foot brake pedal at least 5 times all within 10 seconds after ignition switch has been turned ‘“‘ON”’. . Input self-diagnosis item. (1) Depress and release foot brake pedal. (2) Turn steering wheel from left to right (at least 20°) from the neutral position. (3) (M/T model) Depress clutch pedal and move gear shift lever to any position other than Neutral! land return to Neutral. Release clutch pedal. (A/T model) Disengage and engage parking brake lever. Move shift lever to any position other than Neutral or Parking and return to Parking. (4) Move car at least 3 meters (10 ft) forward and proceed at an indicated speed of at least 2 km/h (1 MPH) in self-diag- nosis mode.
3. The self-diagnosis mode will then appear in the ‘‘HICAS’’ warning lamp. When all systems are normal: HICAS warning lamp flashes at 0.25-second intervals.
ST-48
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.