TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
TROUBLE DIAGNOSES
TROUBLE DIAGNOSES
Preliminary Check
A/T FLUID CHECK
Fluid leakage check
1. Clean area suspected of leaking, — for example, mating surface of converter housing and transmission case.
2. Start engine, apply foot brake, place selector lever in ‘‘D” range and wait a few minutes.
3. Stop engine. Check for fresh leakage.
4. SAT767B Fluid condition check
| Fluid color | Suspected problem |
|---|---|
| Dark or black with burned odor | Wear of frictional material |
| Water contamination | |
| Milky pink | — Road water entering through |
| filler tube or breather | |
| Varnished fluid, light to dark brown and tacky | idatio Oxidation _ — Over or under filling |
| brown and tacky | — Over or under f — Overheating |
»
4
SAT638A
Fluid level check Refer to section MA.
ROAD TESTING
ROAD. TEST PROCEDURE
Description
1. Check before engine is started.
The purpose of this road test is to determine overall
performance of automatic transmission and analyze causes
wy, of problems.
The road test consists of the following three parts:
2. Check at idle. @
Check before engine is started
1. vy Check at idle
2. Cruise test 3
3. Cruise test. SAT786A Before road test, familiarize yourself with all test procedures and items to check. Conduct tests on all items. Troubleshoot items which check out No Good after road test. Refer to ‘‘Self-diagnosis’ and ‘Diagnostic Procedure”’.
SAT639A AT-13
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.