REPAIR FOR COMPONENT PARTS - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › REPAIR FOR COMPONENT PARTS - Nissan 240SX 1991-1992 Workshop Manual
REPAIR FOR COMPONENT PARTS
REPAIR FOR COMPONENT PARTS
Control Valve Assembly (Cont'd)
f. Temporarily assemble lower and upper bodies, using reamer bolt as a guide. Reamer bolt @ Be careful not to dislocate or drop steel balls, orifice check spring, orifice check valve and pilot filter.
g. Install and temporarily tighten bolts and tube brackets in their proper locations. Bolt length and location:
| Item | Bolt symbol | a | b | c | d | |
|---|---|---|---|---|---|---|
| Bolt olt | length leng | mm (in) | 70 (2.76) | 50 (1.97) | 33 (1.30) | 27 (1.06) |
2. Install solenoids.
a. Attach O-ring and install lock-up solenoid and side plates onto lower body.
b. Attach O-rings and install 3-unit solenoids assembly onto 3 upper body. O Shift solenoid A —l co) dj sit solenoid B \7 VU].
IT Weal
Overrun clutch solenoid SAT668A
c. Attach O-ring and install line pressure solenoid onto upper
(<3) | Yo body. - a le
3. Tighten all bolts.
SAT667A
AT-124
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.